Cisco Certified Network Associate Cisco Certified Network Associate

Cisco Certified Network Associate (CCNA 200-301)

Self-Paced Training

With the ever-changing landscape of IT (Information Technology), the demand for highly trained professionals is also rising. Whether you are looking forward to a career in the technology field or aiming to climb higher, having foundational knowledge regarding the latest networking technology is essential.

As software, networking, and infrastructure keep growing more interconnected day by day, having a good understanding of security, automation, and programmability calls for a higher value in career-related prospects. So, if you want to carve out a place for yourself in the IT industry, you need to be proficient in all these.

And CCNA is the one that makes it possible for you to have conceptual knowledge of the latest networking technologies, security, automation, and programmability.

With PyNet Labs' free-of-cost CCNA training, you will gain all conceptual knowledge required to proceed with the higher-level Cisco certification courses training. This training will familiarize you with PyNet Labs' training methodology and aims to enhance network enthusiasts' learnings.

This course presents a series of video presentations interleaved with hands-on lab exercises. In the hands-on exercises, the student will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The recordings cover configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats.

After successfully completing all the modules in this course, you will have the required skills to take networking jobs or seek Cisco's higher certification training such as DEVASC (DEVNET Associate), SD-WAN (Viptela), ENCOR, and more.

Learn 200-301 CCNA FOR FREE

PyNet Labs brings you FREE CCNA Training so that you can learn CCNA without paying anyone. This playlist covers the entire official CCNA curriculum and is suitable for those who are motivated to sharpen their networking skills and look for ways to brush up on their CCNA knowledge.

Course Content

  • Implementing VLANs (Virtual Local Area Networks) and Trunks
  • Routing Between VLANs
  • Introducing OSPF
  • Building Redundant Switched Topologies
  • Improving Redundant Switched Topologies with EtherChannel
  • Exploring Layer 3 Redundancy
  • Introducing WAN (Wide Area Network) Technologies
  • Explaining Basics of ACL
  • Enabling Internet Connectivity
  • Introducing QoS
  • Explaining Wireless Fundamentals
  • Introducing Architectures and Virtualization
  • Explaining the Evolution of Intelligent Networks
  • Introducing System Monitoring
  • Managing Cisco Devices
  • Examining the Security Threat Landscape
  • Implementing Threat Defense Technologies
  • Securing Administrative Access
  • Implementing Device Hardening

Lab outline

  • Get Started with Cisco Command-Line Interface (CLI)
  • Observe How a Switch Operates
  • Perform Basic Switch Configuration
  • Implement the Initial Switch Configuration
  • Inspect TCP/IP Applications
  • Configure an Interface on a Cisco Router
  • Configure and Verify Layer 2 Discovery Protocols
  • Implement an Initial Router Configuration
  • Configure Default Gateway
  • Explore Packet Forwarding
  • Troubleshoot Switch Media and Port Issues
  • Troubleshoot Port Duplex Issues
  • Configure Basic IPv6 Connectivity
  • Configure and Verify IPv4 Static Routes
  • Configure IPv6 Static Routes
  • Implement IPv4 Static Routing
  • Implement IPv6 Static Routing
  • Configure VLAN and Trunk
  • Troubleshoot VLANs and Trunk
  • Configure a Router on a Stick
  • Implement Multiple VLANs and Basic Routing Between the VLANs
  • Configure and Verify Single-Area OSPF
  • Configure and Verify EtherChannel
  • Improve Redundant Switched Topologies with EtherChannel
  • Configure and Verify IPv4 ACLs
  • Implement Numbered and Named IPv4 ACLs
  • Configure a Provider-Assigned IPv4 Address
  • Configure Static NAT
  • Configure Dynamic NAT and Port Address Translation (PAT)
  • Implement PAT
  • Log into the WLC
  • Monitor the WLC
  • Configure a Dynamic (VLAN) Interface
  • Configure a DHCP Scope
  • Configure a WLAN
  • Define a Remote Access Dial-In User Service (RADIUS) Server
  • Explore Management Options
  • Explore the Cisco DNA™ Center
  • Configure and Verify NTP
  • Configure System Message Logging
  • Create the Cisco IOS Image Backup
  • Upgrade Cisco IOS Image
  • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  • Secure Console and Remote Access
  • Enable and Limit Remote Access Connectivity
  • Secure Device Administrative Access
  • Configure and Verify Port Security
  • Implement Device Hardening

Quick Support Number

Feel free to contact for your queries

+91- 98212 15002

Request a call back

Please wait...

Thank you for getting in touch!

Subscribe Our Newsletter

Please wait...

Thank you for sign up!